Page 1 of 1

MST MS01D setupas

Posted: Mon Jul 24, 2017 9:24 pm
by znd
Siulau turintiems isbandyti ant kilimo sita setupa. Padangos dabar pasiekite bet manau nesunku bus atgaudyti sita setupa ir su DS racing.
Tikrai vaziavo puikiai ir netgi galima buvo pasistengus vaziuoti porini su RWD priesininku visai padoriai.

BASIC SETTINGS:

FRONT

camber 5*

caster 10*

toe 2* out

track width +6mm

wheel base (short)

ACKERMAN KNUCKLES (furthest forward hole) + 0.5mm spring





REAR

camber 3*

caster -1 or -2*

toe 1* in

track width +6mm

Wheel base (long)

ALLOY KNUCKLES (furthest forward hole) bump set to normal





tyre - Yokomo R4

Throttle EPA - 80-90%

Motor 10.5T

Pinion / spur 93/18

CS 1.6

BODY WEIGHT: 1150g

FRONT

damper position upper 2

damper position lower 1

oil HPI 40WT
spring Medium to harder



REAR

damper position upper 3

damper position lower 2

oil HPI 40WT

spring MST Medium